|
Ultem® Rods
Ultem Discs
Ultem® Sheets
Other Plastic Rods, Tubes
and Sheets
Carbon Fiber
Noryl
Peek
PES
Polyimide
Polysulfone
PPS
Sintimid
Torlon
TPX
Tapes - Skived, Rolls
Turcite
Tygon Tubing
Stainless Steel Balls
Composite Laminate
Tubes and Rods
Stainless
Steel Sheets, Rods, Bars and Tubes
Contact K-mac
Domestic Selling
Policy
Hoses
Square Watermelon Growing Cases
| |
Bronze
Balls
Much
like brass balls, Aluminum Bronze Balls provide excellent service
in resisting corrosion in water. Cost is moderate in comparison
with other types of large-diameter, corrosion-resisting balls.
Large
size aluminum bronze balls are widely used by manufacturers of valves,
spraying machines, pumps and similar equipment. These balls have many of
the characteristics and advantages afforded by brass balls, however,
they are offered in a range of larger sizes.
 |
|
|
|
Balls
per Pound
|
|
Size
|
Balls
per Pound
|
|
Inches
|
Millimeters
|
|
1
|
25.400
|
6.97
|
|
1
1/4
|
31.750
|
3.57
|
|
1
1/2
|
38.100
|
2.07
|
|
1
3/4
|
44.450
|
1.30
|
|
2
|
50.800
|
0.871
|
|
|
|
|
Material
Analysis:
Bronze
balls are made from the following special chemical analysis:
CDA-624
material is available upon request.
|
|
|
|
|
Material
|
CDA
|
Federal
|
Military
|
ASTM
|
UNS
|
AMS
|
Military
and
Gov't Stds.
|
|
Brass
|
260
|
QQ-W-321c
Comp.7
|
MILW-6712A
Type II
|
B134-52
Alloy 7
|
C-26000
|
4712A
4713A
|
MS
19062
CCAX2
|
|
|
|
|
|
Chemical
Analysis:
Alumimun...................................................................9.0%
to 11.0%
Iron............................................................................2.0%
to 4.0%
Nickel........................................................................5.5%
maximum
Manganese.................................................................1.5%
maximum
Copper.......................................................................Balance
|
|
|
Mechanical
Properties:
Hardness
as measured on parallel flat surfaces is Rockwell “C”
minimum.
Tensile
Strength............................................................95,000psi
Yield
Strength................................................................47,000psi
Elongation in two
inches..............................................12%
Modulus of
elasticity.....................................................12,000,000
to 19,000,000 psi
Density...........................................................................0.275
lbs/cu. in.
© copyright
2005 Hoover Precision Products, Inc., All Rights Reserved
|
|
-
| |
|
